Just T!ckled P!nk

Just T!ckled P!nk - Tutorials by Missy ♥

2015-02-09T02:03:00.000-08:00

Welcome to my new tutorial blog

I hope you all like it

A huge thanks to my good friend Tamie from Addicted Pleasures
For getting this set up for me!! All I had to do was the header and bless her she did the rest
She rocks!! She even added 2 of my old exclusive tutorials from my forum over here too!!
(Flirty Forum set and Dear Santa gosh an old one lol) TY hun ♥ ♥

Some of you will know my tutorials from Divine Intentionz but I am back with a new name! I have been tut writing since 2007
I lost alot of my old ones due to my external breaking however very recently a member of the psp community had copies of some of my old ones so some of them are reposted!!

I did recently have a new site over at google sites, not really sure what happened to it but google sucks!!! lol so thanks for Tamie for offering to help get this up and running otherwise I would of just given up hosting my tuts anywhere!!

You can find my tutorials over on the right side all in order
Feel free to use my tutorials in your group challenges etc
Please do not remove anything from my site

Hope you enjoy my tutorials

Hugs

Missy ♥

Flaunt It

2011-03-07T14:15:00.000-08:00

This tutorial was written for those who have a working knowledge of PSP

For my tutorials I use PSP 9 and Animation Shop

Supplies needed

Tube and close up of choice

I am using artwork by Keith Garvey. You can purchase this tube from PSP Tubes Emporium

Texture of choice - you can find plenty by searching on DeviantArt

Heart Animation here

Fonts of choice - I am using Asuka Caps SSK, bit dust1 and lhf bounce script

Filters

Filter Factory Gallery D-Vertigo

Alien Skin-Xenofex 2-consellation-settings of choice

Penta.com-color dot

L en K landksiteofwonders-L en K's Zitah

VM Extravaganza - transmission

Adjust-Variations

Don't forget to save often!

Let's get started

New Canvas 675 x 250 - set your foreground colour to #ffffff and background colour to #000000

Click on the foreground colour to bring up the materials tab

Select the gradient tab-use the following settings

Flood fill your canvas with this gradient

Adjust-blur-gaussian blur-radius 15.00-click ok

Open up your tube and close up of choice

Arrange these as below

Close off the gradient filled layer-merge visible the tube layers

Reopen the gradient filled layer

Duplicate the merged tube layer twice

On one of the duplicated layers-edit-cut-paste as new image-we will work on this later so now back to your main canvas

On the duplicated merged layer-adjust-blur-gaussian blur-radius 5.00-click ok-change the blend mode to hard light

Duplicate this layer and change the blend mode to screen-lower the opacity to around 58

Duplicate this layer-change the blend mode to soft light

Adjust-blur-radical blur-use the following settings

Lower the opacity to around 74

Open up your texture of choice-colourize it if necessary

The one I used was already a pinky/purple colour so I didn't colourize it

Copy and paste this onto your canvas

Change the blend mode to screen or play about with the blend modes to get the effect you like

You should have something like below- it may differ due to using different textures

Remember earlier that duplicated layer we pasted as a new image-we will now be working on that

New raster layer-flood fill with black

Move this layer below the merged tubed layer

Duplicate the merged tubed layer-adjust-blur-gaussian blur-radius 5.00-change the blend mode to screen then back onto the original merged layer and change the blend mode to Luminance (L)

Edit-copy merged-back to your main canvas-edit-paste as new layer-image-resize by 80%

It should settle in the center of your canvas

Effects-plugins-Adjust-Variations-select more magenta-click ok

Duplicate this layer-adjust-blur-gaussian blur-radius 3.00-change the blend mode to screen and lower the opacity to around 40

Effects-plugins-L en K landksiteofwonders-L en K's zitah-default settings

On the original center layer-selections-select all-float-defloat-selections-modify-expand by 3.00-new raster layer-flood fill with black-selections-select none

On the black flood filled layer-using the selection tool-set on rectangle-draw a rectangle selection around the top border-see below

With this selected-effects-plugins-penta.com-color dot

Default settings-click ok-selections none

Repeat this for the border below

Repeat again for the borders on the left and right but using a different filter-VM extravaganza-transmission

You should now have something like below

You may now add any wording to your banner

I added some wording to the center and some circled wording to the background-play about with the opacity and blend modes on your wording to achieve the effect you like

Add drop shadow 1, 1, 30, 3.00 black to your wording

I also added some pixel wording but this is entirely up to you

Copy and paste your main tube of choice and arrange this in the center-selections-select all-float-defloat-selections-modify-expand by 3.00-new raster layer-flood fill with white-selections-select none-move this layer just below your tube-drop shadow 1, 1, 30, 3.00 black

Duplicate your tube layer-adjust-blur-gaussian blur-radius 3.00-change the blend mode to soft light

Duplicate this layer-change the blend mode to screen-lower the opacity to around 58-effects-plugins-Adjust-Variations-more magenta-and hit lighter-click ok

Select the gradient filled layer from the beginning (should be your very last layer)-selections-select all-float-defloat-selections-modify-select selection borders-use the following settings

New raster layer-flood fill with black

Selections-select none-move this layer to the very top

Repeat the above for another border but change the border width to 6-flood fill with white

For the black border repeat what we did to the center borders

You can now add your name using a font of choice-I am using hf bounce script

Also now is the time to credit your tag and add proper artist info

Now let's animate

We will be animating the background and the white border

So select your texture layer

Effects-plugins-Filter Factory Gallery D-Vertigo-move the intensity up to 30-click ok

Select the white border layer-effects-Alien Skin-Xenofex 2-consellation-settings of choice-click ok

Edit-copy merged-open up Animation Shop-paste as new animation-back to PSP-hit undo-until you are back on the texture layer before we added vertigo

Go to the Vertigo filter again-change the intensity to 50-click ok-add your consellation to your white border-don't forget to hit random

Edit-copy merged-back to AS-paste after current frame-back to PSP and repeat the above until you have 8 frames in AS

Here are my intensity settings I used each time after the 50-75, 100, 120, 136, 153 and 168-don't forget to keep adding the consellation to your white border-hitting random each time

Now you should have 8 frames in AS-test your animation and once happy save as .gif or .mng if you want to add names at a later date

Now its time to make your avatar

Back to PSP-new canvas 150 x 150-flood fill with white-on my banner canvas I closed off the center layers then copy merged the banner

Paste this onto your avatar canvas

Arrange and place where desired

Next we are going to add the borders-see the above tut for adding the borders as its the same

Add any wording if you like

Using a font of choice-add your name and any cr info

Now to animate

I added noise to her necklace but this is optional

Select the white border frame-Alien Skin-Xenofex 2-consellation-settings of choice

Edit-copy merged-over to AS-paste as new animation

Back to PSP-hit undo-repeat your consellation settings but hit random

Back to AS-paste after current frame

Return to PSP-repeat one more time

You should now have 3 frames in AS-edit-select all

Open up the heart animation supplied-you will see it only has 2 frames-copy the first frame then select the 2nd frame-edit-paste after current frame-now the heart will have 3 frames

Edit-select all-edit-copy-over to your avatar frames-edit-paste into selected frame-arrange where desired-paste the heart again if you wish-you will see my avatar has 2 hearts on it but this is up to you

Once happy test your avatar then save as .gif or .mng to add names later on

Thanks for trying my tutorial. I hope you enjoyed it!

This tutorial was written on 7th March 2011.The concept of the tutorial is copyrighted.Feel free to link to the tutorial and or print out for your personal use.But please do not copy it in any way to put online, pass out, or rewrite without permission.The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.Proud member of TWI

Trouble

2011-02-24T06:25:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I purchased this tube at AMI

Tag template #332 by me you can get this from my blog here

Scrap kit by Kristin here

It is a PTU one

Fonts of choice - I am using Bank Gothic, Sick Capital Vice and FFF Urban

Filters used

Eye candy 4000 - Gradient Glow

VanDerLee - Unplugged X - Interlace

MuRa's Meister - Copies

Lets get started - this is a real quick tutorial

Open up my tag template-image-canvas size-change the width and height to 750x 700-click ok

Close off the copyright layer

Select the rectangle left layer-selection-select all-float-defloat

Using paper 36 from the kit-copy and paste onto the selected area

Selections-invert-hit delete-select none

Close off the original rectangle left layer

Repeat this for the rectangle right layer but using paper 27 from the kit

Select the glittered circle right layer-selections-select all-float-defloat

Selections-modify-contract by 6-open up paper 36 from the kit

Copy and paste this onto your canvas-arrange over the selected area

Selections-invert-hit delete-do not deselect just yet

Selections-invert-selections-modify-contract by 10

Using a close up image of choice-copy this over the selected area

Selections-invert-hit delete-selections-select none

Duplicate the close up image-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Repeat the above for the glittered circle left layer

Now select the circle 1 layer-selections-select all-float-defloat

Copy and paste paper 26 from the kit-arrange over the selected circle

Selections-invert-hit delete-selections-select none

Repeat for the circle 2 layer but use paper 2 from Kristin's kit

Keep selected for now-open up the wire element from the kit

Resize if needed-copy and paste this onto your canvas

Making sure it is just above the paper 2 layer-hit delete-selections-select none

Add drop shadow to the wire layer 1, 1, 30, 3.00 black

Change your foreground colour to #96179c and background to #f443bc

Click on the background colour to bring up the material properties

Select gradient tab and use the following settings

Close off the foreground colour-using a pixel font of choice

I am using FFF Urban size 6- add the words 'This Gurl Is Trouble'

Objects-align-center in canvas-convert to raster layer

Effects-plugins-MuRa's Meister-Copies-use the following settings

Select the circle 3 layer-selections-select all-float-defloat

Back on the pixel text layer-selections-invert-hit delete

Selections-select none

Select the frame 1 background layer-select it with the magic wand

Copy and paste your close up image of choice-arrange over the selected area

Selections-invert-hit delete-selections-select none

Duplicate this close up image-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light then on the original image close up layer

Change the blend mode to screen

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Repeat the above for the frame 2 background layer

Now you can start adding any elements of choice from the kit

I added the ribbons, skulls, buckles and some candy elements

Using a font of choice I am using Bank Gothic-same gradient settings as above

Add the word 'Trouble' to your tag-see tag above for placement

Drop shadow 1, 1, 30, 3.00 black

Copy and paste your tube of choice-arrange this in the center of your tag

Duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

Using a font of choice-I am using Sick Capital Vice

Add your name arrange this in the center of your tag

Effects-plugins-eye candy 4000-use the following settings on your name

Drop shadow 1, 1, 30, 3.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 23rd February 2010.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Toxic

2011-02-24T06:08:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Elias Chatzoudis

If you would like to use his artwork please visit Psp Tubes Emporium

Scrap Kit Toxic Candyland by Laura from Cinnamon Scraps you can download this kit from here

Font of choice - I am using FFF Urban, Impact and LD Jilly Nilly

Filters used

Eye Candy 4000 - Gradient Glow

Tramages - Tow The Line

MuRas Meister - Copies

Lets get started

New canvas 700 x 700 flood fill with white

Selection tool-ellipse-draw out a oval shape about the size in the tag above

Open paper 2 from the kit-copy and paste onto your canvas

Selections-invert-hit delete-select none

Effects-plugins-eye candy 4000-gradient glow

Use the following settings

Add drop shadow 0, 0, 40, 10.26 black

Preset shape-rectangle-foreground null-background #0ae3d8

Draw out a thin rectangle-arrange this in the centre of the oval shape

Convert to raster-adjust-add/remove noise-add noise-use the following settings

Drop shadow 1, 1, 40, 4.00 black

Still using the rectangle preset shape-change the background colour to #000000

Draw out a even more thinner rectangle-convert to raster

Arrange this above your previous rectangle

Repeat above drop shadow-duplicate-arrange below the centre rectangle

See tag above

Open up frame 6 from the kit-resize by 80%

Copy and paste this onto your canvas-rotate right by 90

Arrange over the oval shape-using the magic wand

Select the centre of the rectangle-selections-modify-expand by 2.00

Open paper 1 from the kit-copy and paste onto the canvas

Arrange over the selected area-selections-invert-hit delete

Move this layer below the frame layer

Open up your tube of choice-copy and paste onto your tag

Arrange this to the left of the selected area

Hit delete-selections-none

On the tube layer-change the blend mode to Luminance (l)

Lower the opacity to around 68

Select the paper 1 layer-the one we moved below the frame layer

Freehand selection tool-draw out a triangle selection-top left of the paper layer

Effects-plugins-tramages-tow the line-default settings-click ok

It should look like this

Selections-select none

Using a pixel font of choice-I am using FFF Urban-size 6-foreground null-background #fa46aa

I used some lyrics from Britney Spears Toxic

So add the words 'I'm Addicted To You - Don't You Know That You Are Toxic'

Objects-align-centre in canvas-convert to raster

Effects-plugins-MuRa's Meister-copies-use the following settings

Close this layer for now

Using a fat font of choice-I am using Impact-size 170-foreground null-background #000000

Type out the word Toxic-rotate right 90

Move this to the right of your oval shape-convert to raster

Selections-select all-float-defloat-copy and paste paper 3 from the kit

Arrange over the selected word-selections-invert-hit delete

Open up the lyric layer we did earlier-hit delete

Selections-invert-make sure your on the toxic word layer-selections-modify-expand by 2.00

New raster layer-flood fill with white-move this layer below your Toxic word

Drop shadow 0, 0, 4.00, 10.26 black

Open up the beaded word string element from the kit

Copy and paste onto your tag-resize by 80%-rotate right 90

Arrange as above-drop shadow 1, 1, 40, 4.00 black

Open up the journal tag 1 from the kit-resize

Copy and paste onto your tag-rotate left by 15.00

Arrange this to the left of your tag-move the layer just above the oval shape

Duplicate the journal tag-image-mirror-arrange this bottom right of your tag

Copy and paste your main tube onto the canvas

Arrange as above-erasing her arm so its looks like its hooked through the string

This is up to you tho

Duplicate the tube layer-on the duplicated layer

Adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

On the original tube layer-drop shadow 1, 1, 40, 4.00 black

Add any other elements from the kit if desired

I also added some little circle shapes with noise

But again this is up to you

Using a font of choice-I am using LD Jilly Nilly

Add your name-arrange at the bottom of your tag

Add the following gradient glow settings

Drop shadow 0, 0, 40, 10.26 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 12th July 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Too Hot

2011-02-24T05:55:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Keith Garvey

If you would like to use his artwork please visit Psp Tubes Emporium

I purchased this tube when Garv was at MPT

Font of choice - I am using 'Impact' and 'A & S Snapper'

Tribal flowers and screws - If these are yours please email me so I can either credit or remove thanks!

Template by me

Filter used 'Eye Candy - Gradient Glow'

Supplies here

Let's begin

New canvas 600 x 600 flood fill white

Copy and paste the template supplied

Preset shape-rectangle-stoke null-fill black

Draw out a square in the center of the template-convert to raster

Now draw out 2 rectangles-see tag above

Arrange either side of your center square

Using the magic wand-click inside the center square

Copy and paste your tube of choice-arrange to the left of your square

Once happy-selections-invert-delete-select none

Lower the opacity of the tube to 30-duplicate-arrange to the right of your square

Click back on the center square layer-eye candy gradient glow-following settings

Using the magic wand-click inside the left rectangle

Copy and paste your tube-arrange in the selected area

Selections-invert-delete-lower the opacity of the tube to 30

Duplicate then place this in the rectangle on the right

Repeat the above to add gradient glow to the rectangles

Add drop shadow of choice

Using a font of choice-I am using 'Impact' stoke null-fill white

Type any words to match your tag-I chose 'Too Hot'

Convert to raster-rotate left by 90-arrange on the left rectangle

Change the blend mode to overlay

Duplicate your words-image-mirror-image-flip-arrange on your right rectangle

Copy and paste a screw-resize-then place on each of the rectangles

Add the tribal flower-colorize the flowers if desired

Using the same font as above-stoke null-fill black-size 60

Add your words of choice-I chose 'Too Hot' again-convert to raster

Arrange at the top of your tag-using the magic wand

Select all the letters in your words-copy and paste your tube

Arrange over the first letter-selections-invert-delete

Repeat until all your words are filled-merge visible the words and the tube parts

Then repeat the gradient glow-duplicate your words-image-flip-image-mirror

Add drop shadow of choice to the words

Copy and paste your tube-arrange in the middle of your tag-drop shadow of choice

Aad your name-place to the bottom of your tag

Crop and resize if needed

Now add proper copyright info

All thats left is to save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 14th January 2008.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Scream My Name

2011-02-24T05:39:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I purchase this tube from MPT

Scrap kit by Sarah and TammyKat you can purchase this at Pimp My Tags

Tag template #198 by me you can get this from my blog here

Mask 147 by Vix Thanks hun!

Font of choice - I am using 'Century Gothic' and 'FFF Urban'

Filters used - Xero - Fritilary, Penta.com - Jeans, Eye Candy 4000 - Gradient Glow and MuRa's Meister - Copies

Supplies here

Lets get started

Open up your supplies and minimize for now all except my tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Close of my watermark layer

Select the square layer-selections-select all-float-defloat

Open up the purple solid paper from Tammy's part of the kit-copy and paste this onto the canvas

Selections-invert-delete-selections-none

Close off my original square layer-drop shadow 1, 1, 40, 4.00 black

Select the rectangle1 layer-selections-select all-float-defloat

Open paper3 from Tammy's part of the kit-copy and paste this onto the canvas

Selections-invert-delete-selections-none

Effects-plugins-eye candy 4000-gradient glow-using the following settings

Drop shadow 1, 1, 40, 4.00 black

Select the rectangle3 layer-selections-select all-float-defloat

New raster layer-flood fill this black-close off my original layer

Keep selected for now-open up your tube-copy and paste onto the canvas

Arrange to the left of the selected area-selections-invert-hit delete-selections-select none

Duplicate the tube part layer-image-mirror-arrange to the right of the rectangle

Lower the opacity of the tube parts to around 46

Select the black rectangle layer again-effects-plugins-penta.com-Jeans-use the following settings

Repeat the above gradient glow settings-drop shadow 1, 1, 40, 4.00 black

Open up the music notes trail from the kit-selections-select all-float-defloat

New raster layer-flood fill this with #f53997-selections-select none

Resize-copy and paste onto your canvas-arrange over your tube parts

Change the blend mode to Luminance (L)

Select the rectangle2 layer-selections-select all-float-defloat

New raster layer-flood fill this with #f53997-keep selected-close off my original layer

Effects-plugins-Xero-Fritillary-using the following settings

New blank canvas 500 x 500-using a font of choice-I am using FFF Urban set on 6

Type out the words 'Scream My Name'-objects-align-center in canvas-convert to raster

Effects-plugins-MuRa's Meister - Copies-using the following settings

Copy and paste the words onto your tag-arrange over the selected area

Selections-invert-hit delete-add drop shadow 1, 1, 40, 4.00 black to the rectangle layer

Open up the hanging star from the kit-resize-copy and paste onto your tag

Arrange to the left of your tag-using the magic wand-select the center of the star

Selections-modify-expand by 2.00-click ok

Open up your tube again-resize so its small enough to fit inside the star

Copy and paste this onto the canvas-arrange over the selected star

Selections-invert-hit delete-new raster layer-flood fill the selected star with #695489

Selections-select none-move both these layers below the hanging star layer

Add drop shadow to the hanging star 1, 1, 40, 4.00 black

Open up the backstage pass from the kit-resize-copy and paste onto your tag

Rotate right by 10.00-arrange as above-repeat above drop shadow

Add any other elements of choice from the kit

Copy and paste your tube of choice-arrange in the center of your tag

Effects-plugins-eye candy 4000-gradient glow-using the above settings

Drop shadow 1, 1, 40, 4.00 black

Using a font of choice-I am using 'Century Gothic'-add the words 'Scream My Name' to your tag

Arrange at the bottom-see tag above for placement-convert to raster

Repeat above gradient glow settings and drop shadow

Using the same font add your name-arrange under the words you just added

Convert to raster-repeat gradient glow and drop shadow settings

New blank canvas 550 x 550 flood fill with #695489

Layers-new mask layer-from image-look for the mask Vix_Mask147-click ok

Merge group then copy and paste over to your tag-move this layer above the white background layer

Arrange a little to the right of your tag-repeat the above but flood fill with #f53997

Place this above the previous mask layer-moving it a little bit up

Duplicate both the mask layers-arrange bottom left of your tag

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 3rd April 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Rock Princess

2011-02-23T15:21:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

This tube I purchased at MPT thats why it has my MPT license on

Scrap kit by my good friend Tamie which you can get from here

It is a PTU one

Font of choice - I am using Ballpark Weiner and Bank Gothic

Filters used

Eye candy 4000 - Gradient Glow

Lets get started

New canvas 750 x 700 flood fill with white

Foreground null-background black-preset shape ellipse

Draw out a large circle-convert to raster-add drop shadow 1 ,1 ,30, 3.00 black

Draw out another circle-just abit smaller than the one we just did-convert to raster

Selections-select all-float-defloat-open up paper 1 from Tamie's kit

Copy and paste this onto your canvas-selections-invert-hit delete

Selections-select none

Draw out another circle a little bit smaller again

Convert to raster-selections-select all-float-defloat

Open up paper 5 from the kit-copy and paste this onto the canvas

Selections-invert-hit delete-selections-invert

Selections-modify-expand by 4.00-new raster layer-flood fill with white

Adjust-add/remove noise-add noise-use following settings

Move this layer below the paper 5 layer

Drop shadow 1, 1, 30, 3.00 black

Foreground null-background #df3e94-preset shape ellipse

Draw out a circle smaller than the center ones-convert to raster

Arrange this to the left of your tag--selections-select all-float-defloat

Selections-modify-expand by 4.00-new raster layer-flood fill with #924fae

Selections-select none-use above noise settings

Drop shadow 1, 1, 30, 3.00 black

Open the music note element from the kit-copy and paste to the canvas

Arrange this on the circle to the left of your tag

Resize if needed-change the blend mode to soft light

Open up the record element-resize-copy and paste onto your tag

Arrange this over the music note element

Open the polariod frame from the kit-copy and paste this onto the canvas

Rotate left by 10.00-arrange this over the record element

Using the magic wand-select inside the frame-selections-modify-expand by 4.00

Open up paper 8 from the kit-copy and paste to the canvas

Arrange over the selected area-selections-invert-hit delete

Open your tube of choice-copy and paste this over to your tag

Arrange within the selected frame-hit delete-selections-select none

Duplicate the tube layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light on the original tube layer change the blend mode to screen

Repeat the above for the right hand side of your tag

Open the piano key element-copy and paste onto your tag

Resize if needed-arrange as above

Selections-select all-float-defloat-selections-modify-expand by 2

New raster layer-flood fill with #924fae-selections-select none

Add above noise settings-move this layer below the piano keys

Drop shadow 1, 1, 30, 3.00 black

Open up a film strip-arrange this in the center of your tag

Grab the magic wand-select all the center squares on your film strip

Selections-modify-expand by 3.00

Copy and paste a paper of choice from the kit-selections-invert

Move this layer below the film strip

Copy and paste your tube of choice-arrange within the selected squares

Selections-invert-hit delete-repeat until all the squares is filled with your tube

Selections-select none

Duplicate the tube layers we just added-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to screen-on the original tube layers blend mode should be Luminance (L)

Select the film strip layer again-selections-select all-float-defloat

Selections-modify-expand by 4.00-new raster layer

Flood fill with #df3e94-move this layer below the film strip layer

Adjust-add/remove noise-add noise-use following settings

Drop shadow 1, 1, 30, 3.00 black

Copy and paste your tube of choice-arrange this in the center of your tag

Duplicate-adjust-blur-gaussina blur-radius 3.00

Change the blend mode to soft light-on the original tube layer-add drop shadow 1, 1, 30, 3.00 black

Now add any elements from the kit

I added the ribbons, wire clips, trim, bow and rose

On one of the clips I erased princess and add rock using Bank Gothic font

This is entirely upto you tho

Foreground #924fae and background #df3e94

Clicking on the background colour to being up the materials properties

Select the gradient tab and use following settings

Close off the foreground colour

Using a font of choice-I am using Bank Gothic

Add the words 'Rock Princess'-convert to raster

Arrange at the bottom of your tag-drop shadow 1, 1, 30, 3.00 black

Using the same gradient settings add some stars to your tag as above

Also using the pen tool draw out a dotted line

Arrange this at the bottom of your tag

Using a font of choice-I am using Ballpark Weiner

Add your name to your tag-add above noise settings if you wish

Also you can add the following gradient glow settings to your name

Drop shadow 1, 1, 30, 3.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 23rd February 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Riot

2011-02-23T15:13:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

Tag template #333 by me you can get this from my blog here

Scrap kit by Pimp My Tags here

It is a PTU one - Scream My Name

Film Strip of choice I cannot not supply the one I used

Fonts of choice - I am using Sick Capital Vice and FFF Urban

Filters used

Eye candy 4000 - Gradient Glow

Penta.com - color dot

VanDerLee - Unplugged X - Interlace

Lets get started

Open up my tag template-image-canvas size-change the width and height to 750x 700-click ok

Close off the copyright layer

Select the circle 3 layer-selections-select all-float-defloat

Open up the black solid paper from the kit

Copy and paste onto the canvas-selections-invert-hit delete

Selections-select none

Select the circle 4 layer-selections-select all-float-defloat

Copy and paste the pink solid paper from the kit

Selections-invert-hit delete

Open up your close up of choice-copy and paste this over to your canvas

Arrange over the selected circle-once happy-hit delete

Selections-select none-duplicate the close up image

Adjust-blur-gaussian blur-radius 3.00-change the blend mode to soft light

On the original close up image change the blend mode to screen

Select the pink solid paper again-selections-select all-float-defloat

Selections-expand by 4.00-new raster layer-flood fill with #59c9ca

Selections-select none-add the following noise settings

Using a film strip of choice-copy and paste this onto your canvas

Rotate as above

Using the magic wand select inside the film strip squares

Selections-modify-expand by 2

Open up the blue solid paper from the kit

Copy and paste this over the film strip

Selections-invert-hit delete-move this paper layer below the film strip layer

Copy and paste your tube of choice over to your canvas

Arrange over the selected film strip-hit delete

Making sure the tube layer is below the film strip layer

Duplicate the tube layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light also on the original tube layer too

Selected the duplicated tube layer again

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Select your film strip layer-selections-select all-float-defloat

Selections-modify-expand by 4.00-new raster layer

Flood fill with white-selections-select none

Move this layer below the film strip layer-add the above noise settings

Drop shadow 1, 1, 30, 3.00 black

Select the rectangle 2 layer-selections-select all-float-defloat

Copy and paste your tube of choice-arrange to the left of the selected rectangle

Selections-invert-hit delete-paste the tube again but arrange to the right of the rectangle

Hit delete-selections-invert-selections-modify-expand by 2

New raster layer-flood fill with white-move this layer below rectangle 2 layer

Selections-select none-add above noise settings-drop shadow 1, 1, 30, 3.00 black

Back to the tube layers we just added-select the tube layer thats on the left of the rectangle

Duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to screen on the original tube layer

Selected the duplicated tube layer again

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Repeat for the tube on the right of the rectangle

Foreground null-background #df3e94-preset shape-rectangle

Draw out a rectangle thiner than the rectangle 2 layer

Convert to raster-move this layer below the rectangle 2 layer

Effects-plugins-penta.com-color dot-use the following settings

Add drop shadow 1, 1, 30, 3.00 black

Select the small circle 1 layer-selections-select all-float-defloat

Copy and paste the blue solid paper from the kit

Arrange over the circle-selections-invert-hit delete

Close off the original circle layer

Add above penta.com-color dot settings on the blue solid paper layer

Repeat the above forthe small circle 2 layer

Now on the thin rectangle layer-selections-select all-float-defloat

New raster layer-flood fill with #59c9ca-selections-select none

Add above penta.con-color dot settings

Close off the original thin rectangle layer

Repeat above drop shadow

Using the pen tool draw out a thin dotted line

Arrange this just below this rectangle

Using a pixel font of choice-I am using FFF Urban size 6

Add the words 'Causing A Riot' rotate left by 90

Arrange next to your film strip-convert to raster

Foreground null-background #59c9ca-preset shape-star shape

Draw out a small star-see tag above

Convert to raster-arrange as above-add above noise settings

Drop shadow 1, 1, 30, 3.00 black-duplicate see tag for arrangement

You can now start adding any elements from the kit

See tag above

Once you have added your elements you can now add your main tube of choice

See tag above for placement-duplicate the tube-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

Select the original tube layer add drop shadow 1, 1, 30, 3.00 black

Using a font of choice-I am using Sick Capital Vice

Add your name-arrange as above-convert to raster

Add following gradient glow settings to your name

Drop shadow as above

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 23rd February 2010.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Ribbons and Skulls

2011-02-23T15:07:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Barbara Jensen

If you would like to use her artwork please visit here

Tag template 2 by Melissa - you can grab it here Thanks Melissa!!

Bow of choice - I am using the one from Yvette's Girlz Rock kit over at Misfits Scrapz

2 papers of choice - pink and black - I used a pink one from my Glitter My Fancy kit

The black one I used was from Kristins Rock Revolution kit

Mask 185 by Vix Thanks hun!

Texture by Two Beats (Supplied)

Font of choice - I am using 'Roeland Rob' and 'FFF Urban'

Ribbon of choice

Filter used - 'Eye candy 4000 -Gradient Glow' 'MuRas Meister - Copies' and 'Penta.com - Jeans

Supplies here

Lets get started

Open up your supplies and minimize for now all except the tag template

Image-canvas size-change the width and height to 700 x 700-click ok

New raster layer-flood fill white-move this layer to the bottom

Select the small rectangle layer-selections-select all-float-defloat

Maximize the texture supplied-resize it so its just abit larger than the small rectangle

Copy and paste this onto your canvas-selections-invert-hit delete

Do not deselect yet-copy and paste your tube of choice-arrange over the texture left of the rectangle

Hit delete-paste your tube again-arrange in the center of the rectangle-hit delete

Paste the tube once more-arrange to the right of the rectangle-hit delete

Selections-select none-close off all the layers all except the tube layers

Merge visible the tubes-un X all your layers

Select the texture layer-colorize with a colour from your tube

Select the merged tube layer-change the blend mode to Luminance (L)

Duplicate this layer-on the duplicated layer-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to multiply

Effects-plugins-penta.com-jeans-using the following settings

Click ok

Select the small rectangle frame layer-selections-select all-float-defloat

New raster layer-flood fill this with a colour from your tube

Selections-select none-drop shadow 0, 0, 60, 12.83 black

Select the large rectangle layer-selections-select all-float-defloat

Using a pink paper of choice-copy and paste this over the selected rectangle

Selections-invert-hit delete-close off the original rectangle layer

Repeat the above for the bottom rectangle layers-using a black paper of choice

Drop shadow as above-close off the original bottom rectangle layer

Using a font of choice-a pixel one will work best-I am using FFF Urban

Type out the words 'Ribbons and Skulls' in a colour of choice

Convert to raster-effects-plugins-MuRas Meister - Copies-using the following settings

Click ok-arrange over the pink papered rectangle

Select the rectangle-selections-select all-float-defloat

Selections-invert-select the text layer-hit delete-selections-select none

Select the pink papered rectangle layer again-add the filter eye candy 4000 - gradient glow

Using the following settings

Drop shadow 0, 0, 60, 12.83 black

Add above drop shadow to the wordart layer

Add a ribbon and bow of choice if desired-see above tag for placement

Repeating above drop shadow

Erase one of the skulls from the template if desired

Copy and paste your tube of choice-arrange in the center of the tag

Add gradient glow to the tube using the same settings as above

Drop shadow 0, 0, 40, 10.26 black

New blank canvas 550 x 550 flood fill with a pink colour

Layers-new mask layer-from image-look for the mask Vix_Mask185-click ok

Merge group then copy and paste over to your tag-move this layer above the white background layer

Arrange to the left of your tag-repeat the above but flood fill with black then arrange that to the right of your tag

Add your name to your tag-arrange at the bottom of your tag-rotate left by 15.00

Add the same gradient glow settings as above-drop shadow 0, 0, 40, 10.26 black

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 16th March 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Peep Show

2011-02-23T14:58:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Barbara Jensen

If you would like to use her artwork please visit here

Scrap kit by Pimp My Tags here

It is a PTU one - Peep Show

Fonts of choice - I am using Hursheys

Filters used

VanDerLee - Unplugged X - Interlace

Lets get started

New canvas 750x 700 flood fill white

Using the selection tool-set on circle-draw out a large circle in the center of your canvas

Open up the pink paper from the kit-copy and paste this onto your canvas

Selections-invert-hit delete-selections-invert-selections-modify-expand by 4

New raster layer-flood fill with white-add the following noise settings

Drop shadow 1, 1, 30, 3.00 black

Set your foreground to black-background null

Preset shape-ellipse-change the line style to diamond-width 4

While holding down the shift key-draw out your dotted circle

Arrange this as above on your pink paper circle

Foreground null-background black-preset shape-ellipse

Draw out a smaller circle for the center-convert to raster

Arrange this in the center of the dotted circle

Add above drop shadow

Selection tool-set on circle-draw out a selected circle

A little bit smaller than the center circle we just did

Open up the censor paper from the kit

Copy and paste this to your canvas-arrange over the selected circle

Selections-invert-hit delete-selections-select none

Arrange this to the left of your tag-move this layer just above your white background layer

Selections-select all-float-defloat-selections-modify-expand by 4.00

New raster layer-flood fill with #ec82aa

Selections-select none-move this layer below the paper circle

Add above noise settings and drop shadow 1, 1, 30, 3.00 black

Duplicate this layer and the circle paper layer-arrange to the right of your tag

Open up the double frame from the kit-resize-copy and paste this onto your tag

Arrange to the left of your center circles-duplicate-image-mirror

Make sure the duplicated frame is to the right of the center circles

Add above drop shadow to both the frame layers

Using the selection tool-set on rectangle

Draw around the frame on the left-see below

Open up the grey paper from the kit-copy and paste over to your tag

Arrange over the selected area-selections-invert-hit delete

Move this layer below the frame layer

Copy and paste your tube of choice-arrange this over the grey paper we just added

Once happy with the placement-hit delete

Selections-select none

Duplicate the tube part we just added

Adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light on the original tube part layer change blend mode to Luminance (L)

Select the duplicated tube part again

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Repeat the above for the frame on the right

Open the circle frame from the kit-resize-copy and paste onto your tag

Arrange this in the center on your tag

Selections-select all-float-defloat--selections-modify-expand by 4.00

New raster layer-flood fill with white-selections-select none

Add above noise settings to the white layer

Still on this layer-using the magic wand select in the center

Selections-modify-expand by 2

Copy and paste the censor paper-arrange over the selected area

Selections-invert-hit delete-selections-select none

Foreground null-background black-preset shape-rectangle

Draw out a thin rectangle shape-convert to raster-arrange bottom right of your tag

Add above drop shadow

Now you can start adding any elements from the kit and arrange as above

Copy and paste your tube of choice-arrange in the center of the tag

Drop shadow 1, 1, 30, 3.00 black

Using a font of choice-I am using Hursheys-add your name to your tag

Arrange as above

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 23rd February 2010.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Punkified

2011-02-23T14:52:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

Tag template #256 by me you can get this from my blog here

Font of choice - I am using FFF Urban, Actionis & Radius

Filters used

Eye candy 4000 - Gradient Glow

VanDerLee - Unplugged X - Interlace

Penta.com - color dot and jeans

Lets get started

Open up my tag template-close off the watermark layer

Image-canvas size-change the width and height to 700 x 700

Select the oval shape layer-selection-select all-float-defloat

Open up your close up of choice-copy and paste onto your canvas

Arrange this to the left-once happy-selections-invert-hit delete

Selections-select none-duplicate the close up layer-image-mirror

Arrange to the right of the oval shape

Duplicate the close up layer-on the duplicated layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original close up layer change the blend mode to screen

Lower the opacity on this layer to around 40

Repeat for the close up layer on the opposite side

Using the selection tool-rectangle-draw out a rectangle selection top part of the oval shape

Effects-plugins-penta.com-color dot-use following settings

Selections-select none-selection tool again-draw out another rectangle selection

This time a thin one-just below the previous one

Effects-plugins-penta.com-jeans-use following settings

Selections-select none

You should now have this

Close off the gradient oval shape layer for now

Select the small oval shape layer-selections-select all-float-defloat

Copy and paste your close up again-arrange this on the right of the small oval shape

Selections-invert-hit delete

Selections-select none-duplicate the close up layer

Image-mirror-arrange this to the left of your tag

Duplicate the left close up layer

Adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original close up layer change the blend mode to luminance (L)

Repeat for the right close up layer

Reopen the gradient oval shape layer

Select the wordart layer-selections-select all-float-defloat

Copy and paste your close up again-arrange over the selected letters

Selections-invert hit delete-repeat until the wordart is filled with your close up tube

Close off all your layers all except the close up layers we just filled the wordart with

Merge visible these layers-reopen the closed off layers

Now on the merge tube layer-duplicate-adjust-blur-gaussian blur-radius

Change the blend mode to soft light-select the original close up layer

Change the blend mode to luminance (L)-lower the opacity to around 40

On the duplicated layer-effects-plugins-VanDerLee-Unplugged-Interlace

Default settings-click ok

Using a pixel font of your choice-I am using FFF Urban

Add the words 'Shes So Punkified' type it out about 4 times

Convert to raster-arrange as above-I added one above and below the main Punkified word

And one in the centre of the word

Add drop shadow of 1, 1, 20, 2.00 black to the rectangle 1 & 2 layers

Using a font of choice-I am using Radius-add the word 'Punkified' to these 2 layers

Drop shadow 0, 0, 40, 10.26 black

Copy and paste your tube of choice-arrange this in the centre of your tag

Duplicate-adjust-blur-gaussian blur-radius

Change the blend mode to soft light

On the original tube layer-add drop shadow 0, 0, 40, 10.26 black

Add your name to your tag-I used Actionis font

Arrange as above-add gradient glow of choice

Drop shadow as above

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 16th August 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Playful Or Provocative

2011-02-23T14:46:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Keith Garvey

If you would like to use his artwork please visit Psp Tubes Emporium

I purchased this tube from MPT

Tag template #14 by Mirella you can get it from her blog here

Font of choice - I am using Roelandt Rob, Impact,Century Gothic and FFF Urban

Diamond

Filters used

Eye Candy 4000-Gradient Glow, MuRa's Meister-Copies and Tone and Penta.com-color dot

Supplies here

Lets get started

Open up your supplies and minimize for now all except the tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Select the layer named raster 4-selections-select all-float-defloat-new raster layer

Set your foreground colour to #84d8e5 and the fill to #ffffff

Click on the foreground colour then choose the gradient tab

Using the following settings

Now flood fill the selected area with that gradient-selections-select none

Effects-plugins-penta.com-color dot-using the following settings

Select the layer named raster 3--selections-select all-float-defloat-new raster layer

We are going to use the same gradient settings as above but making sure invert is ticked this time

Flood fill the selected area with that gradient-do not deselect yet

New raster layer

Effects-plugins-MuRa's Meister-tone-using the following settings

Selections-select none-change the blend mode to soft light

Select raster 5 layer-selections-select all-float-defloat-new raster layer

Flood fill this with this colour #2a2a2a-keep selected

New blank canvas 500 x 500-using a font of choice-I am using FFF Urban set on 6

Type out the words 'Playful Or Provocative'-objects-align-center in canvas-convert to raster

Effects-plugins-MuRa's Meister - Copies-using the following settings

Copy and paste the words onto your tag-arrange over the selected area

Selections-invert-hit delete-I used the selection tool-rectangle to remove the excess letters

Do not deselect just yet

Copy and paste your tube of choice-arrange to the right of the selected area

Hit delete-selections-select none-duplicate the tube part-image-mirror

Arrange to the left-duplicate this layer-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to soft light-select the original tube part layer-change this blend mode to Luminance (L)

Repeat this for the tube part of the right

Make sure these layers are below the words layer

Select raster 6 layer-selections-select all-float-defloat-new raster layer

Flood fill this with the same gradient settings as above-selections-select none

Drop shadow 1, 1, 20, 2.00 black-close off the original raster 6 layer

Repeat for the layer named copy of raster 6

Now on the raster 2 layer-selections-select all-float-defloat

New raster layer-flood fill this with the above gradient settings

Selections-select none-repeat the above penta.com-color dot settings-drop shadow 1, 1, 30, 3.00 black

Close off the original layer

Copy and paste your tube-arrange in the center of your tag-drop shadow 1, 1, 40, 4.00 black

Duplicate it-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to soft light

Using the font tool-font of choice-I am using Impact

Using the same gradient colours as above-add the word 'Provocative'

Arrange this at the bottom of your tube-convert to raster

Repeat the above penta.com-color dot settings

Selections-select all-float-defloat-selections-modify-expand by 2.00

New raster layer-flood fill this white-selections-select none

Move this below the Provocative word-drop shadow 1, 1, 30, 3.00 black

Font tool again-font of choice-a nice script font will work-I am using Roelandt Rob

Add the words 'Playful Or'-convert to raster- arrange this on top of the Provocative word

Repeat drop shadow

Copy and paste the diamond supplied-colorize to match your tag-arrange either side of Provocative

Using another font of choice-I am using Century Gothic-add your name

Convert to raster-effects-plugins-eye candy 4000-gradient glow

Drop shadow 1 ,1 ,30, 3.00 black-arrange where desired

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 1st April 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Misfits Rock

2011-02-23T14:34:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Elias Chatzoudis

If you would like to use his artwork please visit Psp Tubes Emporium

Font of choice - I am using 'LD Jilly', 'Century Gothic' and 'Impact'

Scrap kit of choice - I am using 'Misfit' it is a Creative Misfits exclusive kit sorry I cannot share

A huge thanks to Kristin from Toxic Desirez for an awesome kit!!

Filter used - VM Extravaganza - Transmission and Eye Candy 4000 - Gradient glow

This tut is dedicated to all the girls at Creative Misfits yup even you Brat lol

Let's get started

New canvas 700 x 700 flood fill white

Select the font tool-choose your font a nice fat one will work-I am using 'Impact'

Type out the word 'Misfits' or whatever word you like-make it nice and big

Convert to raster-selections-select all-float-defloat-choose a paper from the kit

Copy and paste onto your canvas-arrange over the selected words-selections-invert-delete

Selections-invert-selections-modify-expand by 2-new raster layer-flood fill with a colour of choice

Selections-modify-expand by 4-new raster layer-flood fill white-selections-select none

Drop shadow 0, 0, 40, 4.00 black

Using a font of choice-I am using 'Century Gothic' add 'Misfits Rock' or any words of choice

I added these at the top and bottom of the word Misfits-convert to raster then add gradient glow

Add drop shadow 1, 1, 30, 3.00 black

Preset shape-set to rectangle-foreground null-fill colour of choice

Draw out a rectangle a little bigger than your main center word

Convert to raster-adjust-blur-gaussian blur-change the radius to 20.00-click ok

Add the filter-VM Extravaganza - Transmission-default settings-click ok

Move this layer above the white background-lower the opacity to around 46

Add any elements from the kit-arrange where desired-drop shadow 1, 1, 30, 3.00 black

Copy and paste your tube of choice-place in the center of your tag

Add the gradient glow filter same settings as above if desired then add above drop shadow

Using a font of choice-I am using 'LD Jilly' add your name-arrange where desired

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 26th February 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Love My Bugs

2011-02-23T14:25:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Suzanne Woolcott

If you would like to use her artwork please visit her store here

I purchased this tube when she was at AMI

Scrap kit by Nit Wit Collections - 'Whats The Buzz' kit which you can get purchase from here

Tag template #22 by me you can download it here

Font of choice - I am using 'Will and Grace'

Filter used - Eye Candy - Gradient Glow

Let's begin

Open up my tag template #22-image-canvas size-change the width and height to 800 x 800

This will give you plenty of room to work we can crop and resize later on

Close off the 'by missy' layer

Duplicate the shape layer-click on the original shape layer

Image-resize-change the width and height to 110 percent-click ok

Still on this layer-selections-select all-float-defloat

Choose a paper from the kit-resize-copy and paste this onto your canvas

Selections-invert-hit delete-select none-close off the layer named 'shape'

Add drop shadow to the paper shape layer 0, 0, 50, 5.00 black

Now select the duplicate shape layer-selections-select all-float-defloat

Choose another paper from the kit-resize-copy and paste over to your tag

Selections-invert-hit delete-select none-close off the duplicated shape layer

Still on the smaller paper shape layer-selections-select all-float-defloat-modify-expand by 2.00-click ok

New raster layer-flood fill this white-select none-move this below the smaller paper shape layer

Drop shadow 1, 1, 40, 4.00 black

Click on the frame background layer-selections-select all-float -defloat

Choose a blue paper from the kit-resize-copy and paste onto your tag

Selections-invert-hit delete-select none-close off the frame background layer

Select the frame layer-selections-select all-float-defloat

Choose another paper from the kit-resize-copy and paste over to your tag

Selections-invert-hit delete-select none-close off the frame layer

Add drop shadow to the paper frame layer 1, 1, 40, 4.00 black

Open up the grass border from the kit-resize-copy and paste onto your tag

Arrange on the frame-erasing any excess from either side of the frame

Add drop shadow to the grass layer 1, 1, 40, 4.00 black

Now add any other elements from the kit I added some bugs and bows etc to make up my tag

Make sure to add above drop shadow to whatever you add

Add your tube of choice-arrange as above-repeat drop shadow

Using a font of choice add your name-arrange at the bottom of your tag

Now add the filter gradient glow-glow width 3.00-click on the color tab-click on Fat then click ok

Drop shadow 1, 1, 40, 4.00 black

Crop and resize if needed

Add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 1st August 2008.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Lush

2011-02-23T14:13:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube and close up of choice

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I bought this one when Ismael was at AMI

Brad by me

Font of choice - I am using Pussycat, FFF Urban, Impact and Water Brush Rob

Filters used

Eye Candy 4000 - Gradient glow

Penta.com - color dot

Supplies here

Lets get started

New canvas 700 x 700 flood fill with white

Change the foreground to #ffffff and background to #7f7fe4

Click the background colour choose the gradient tab-following settings

Close the foreground for now-preset shape-ellipse

Draw out a oval shape about the size of mine above

Convert to raster-selections-select all-float-defloat

Open up your close up of choice-copy and paste onto your canvas

Arrange to the right of the oval shape-selections-invert-hit delete

Select the oval shape layer again-selections-invert-selections-modify-expand by 5.00

New raster layer-flood fill with #ffffff-selections-select none

Move this layer below your original oval shape layer

Adjust-add/remove noise-add noise-use following settings

Drop shadow 0, 0, 40, 10.26 black

Select the close up layer-duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-select the original close up layer

Change the blend mode to luminance (L)-select the duplicated close up layer

Effects-plugins-penta.com-color dot-use the following setting

Select the font tool-Impact-foreground null-background #00000-size 110

Type out the word 'LUSH' rotate left by 90-arrange as above-convert to raster

Selections-select all-float-defloat-copy and paste your close up over the selected area

Selections-invert-hit delete-selections-invert-modify-expand by 2.00

New raster layer-flood fill with #7f7fe4-selections-select none

Add above noise settings-move this layer below the original Lush layer

Drop shadow 0, 0, 40, 10.26 black

Select the close up layer on your word Lush-duplicate this

Adjust-blur-gaussian blur-radius 3.00-change the blend mode to soft light

Preset shape-ellipse-foreground null-background #ffffff

Draw our a small circle about the size of mine above

Convert to raster-selections-select all-float-defloat

Open up your close up again-image-mirror-copy and paste on to your canvas

Arrange over the selected circle-selections-invert-hit delete

Selections-invert-selections-modify-expand by 5.00

New raster layer-flood fill with #ffffff-add above noise settings

Move this layer below the circle close up layer-add above drop shadow settings

Select the circle close up layer-duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original circle close up layer change the blend mode to luminance (L)

Select the duplicated layer-using the selection tool-rectangle

Draw out some vertical rectangles on the duplicated layer

Then hit delete-selections-select none

Open up the brad supplied-arrange as above

Preset shape-rectangle-foreground null-background #00000

Draw out 2 thin rectangles-arrange as above-repeat above drop shadow

Using a font of choice-I am using Pussycat-add the words 'Appealing' and 'Attractive'

Arrange as above-draw out 2 stars-add above noise settings

Then arrange next to these words

Preset shape-rectangle-foreground null-background #7f7fe4

Draw out 2 more thin rectangles-arrange as above-convert to raster

Add above noise settings again

Effects-plugins-eye candy 4000-gradient glow-use the following settings

Using a pixel font of choice-I am using FFF urban

Type out the words 'Lush' do this a few times

Convert to raster-arrange as above

Repeat if desired and arrange like in above tag

Copy and paste your tube of choice-arrange in the centre of your tag

Erasing any excess-duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original layer repeat above drop shadow

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 6th September 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

I've Got Your Man

2011-02-23T13:59:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Keith Garvey

If you would like to use his artwork please visit PSP Tubes Emporium

I bought this tube from MPT

Mask #220 by Weescotslass Thanks hun!

Font of choice - I am using Bank Gothic and Times New Roman

Filters used - Penta.com - Color dot, DSB Flux - Linear Transmission and MuRa's Meister - copies

Supplies here

Lets begin

New canvas 700 x 700 flood fill white

Preset shape-rectangle-stoke null-fill #000000

Draw out a rectangle-about the size as shown below-convert to raster

Open up your tube of choice-copy and paste onto your canvas

Effects-plugins-MuRa's Meister - copies-use following settings

Click ok-adjust-blur-gaussian blur-change the radius to 20.00-click ok

Select the rectangle layer-selections-select all-float-defloat-selections-invert

Select the tube blurred layer-hit delete-selections-select none

You should have something like this

Copy and paste your tube of choice onto your canvas again

Arrange over the rectangle-resize by 80%-erase any excess

Duplicate the tube layer-adjust-blur-gaussian blur-change the radius to 3.00-click ok

Change the blend mode to soft light

Back on the original tube layer-change the blend mode to hard light

Back on the duplicate tube layer-effects-plugins-dsb flux-linear transmission

Use following settings

Using the selection tool-rectangle-draw out a rectangle shape-see screenshot below

Hit delete-this is where we will add the words later on in the tutorial

Selections-select none

Still on the duplicated tube layer-effects-plugins-penta.com-color dot

Use following settings

Preset shape-rectangle-stoke null-fill #000000

Draw out a rectangle-just abit bigger than the one we have been working on-convert to raster

You should now have this

Preset shape-rectangle-stoke #fffff-fill null-line style diamond-size 4.00

Draw out a rectangle so you have something like this-then convert to raster

Close off the white background layer-merge visible all your layers

Reopen the white background-move the merged layer to the left of your canvas

Add drop shadow 0, 0, 40, 10.26 black

Duplicate the merged layer-image-mirror-move it a little more to the right if needed

Using a font of choice-I am using Bank Gothic-add the words 'I've Got Your Man'

Convert to raster-rotate left by 90

Arrange this on that rectangle strip we deleted earlier-see above tag

Change the blend mode to overlay-drop shadow 1, 1, 40, 4.00 black

Duplicate the words layer-image-mirror-image flip

Arrange this on the right rectangle

Now we are going to start on the background of your tag

Preset shape-rectangle-stoke null-fill #000000

Draw out a square shape-see tag above for size-convert to raster

Copy and paste your tube of choice onto the canvas

Effects-plugins-MuRa's Meister - copies-use following settings

Click ok-adjust-blur-gaussian blur-change the radius to 20.00-click ok

Select the square layer-selections-select all-float-defloat-selections-invert

Select the tube blurred layer-hit delete-selections-select none

Copy and paste your tube again-arrange to the left of the square shape

Adjust-hue and saturation-colorize-change both the hue and sat to 0-click ok

Duplicate the tube layer-adjust-blur-gaussian blur-change the radius to 20.00-click ok

Change the blend mode to soft light-back to the original tube layer change the blend mode to hard light

Back on the duplicated tube layer-add the filter linear transmission again using the same settings as above

Lower the opacity of the duplicated tube and original tube layer to around 50

You should now have this

Repeat the above so you got a tube on the right of the square also

Preset shape-rectangle-stoke null-fill #000000

Draw out a square shape-larger than the previous one-see tag above for size-convert to raster

Add drop shadow 0, 0, 40, 10.26 black

Copy and paste your tube-arrange in the center of your tag

Duplicate-on the duplicated layer-adjust-blur-gaussian blur

Change the radius to 3.00-click ok-change the blend mode to overlay

Select the original tube layer-drop shadow 0, 0, 40, 10.26 black

Using a font of choice-I am using Bank Gothic-add the words 'I've Got Your Man'

To the bottom of your tag-convert to raster-drop shadow 1, 1, 40, 4.00 black

Duplicate-arrange the duplicated layer at the top of your tag

Layers-new mask layer-from image-look for the mask WSL_Mask220-click ok

Merge group then copy and paste over to your tag-move this layer above the white background layer

Arrange to the right of your tag-lower the opacity to around 24

Duplicate-image-mirror-flip-arrange to the left of your tag

Using a font of choice-I am Using Times New Roman add your name to the bottom of your tag

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 3rd May 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Its Better To Be A Misfit

2011-02-23T13:46:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

This was a Misfit commission from Vianna ♥

Font of choice - I am using FFF Urban, Radius & Inspiration Rob

Filters used

Penta.com - Color dot

Eye candy 4000 - Gradient Glow

Lets get started

New canvas 700 x 700 flood fill with white

Preset shape-ellipse-foregound null-background #f23092

Draw out a oval shape about the size of mine above

Convert to raster

Draw out some rectangles see below for size, colour and arrangement

Click on the oval shape-selections-select all-float-defloat

Selections-invert-click on each of the rectangles and hit delete

Selections-select none

Using the pen tool-line style diamond-width 4.00- foreground #f23092-background null

Draw out a vertical line-arrange this on the first rectangle on the left

Duplicate-image-mirror-arrange on the rectangle on the right

Change the line width on the pen tool to 2.00

Draw out another vertical line-arrange on the left thin black rectangle

Duplicate-image-mirror-arrange on the right rectangle

Using a pixel font of choice-I am using FFF Urban size 6 anti alias off

Addd the words Misfit type it out 7 or 8 times

Rotate left by 90-arrange over the left pink rectangle

Convert to raster-duplicate-image-mirror-flip-arrange on the right pink rectangle

Select the thick black rectangle shape on the left of your tag

Selections-select all-float-defloat-copy and paste your close up of choice

Arrange over the selected area-selections-invert-hit delete-selections-select none

Duplicate the close up-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original close up layer

Change the blend mode to luminance (L)

Select the top close up layer

Selection tool-rectangle-draw out a rectangle selection on the close up

Effects-plugins-penta.com-color dot-use the following settings

Selections-select none

Using the selection tool-rectangle-next to where you added color dot filter

Draw out 3 thin selected rectangles

Select the black shape layer that is under the close up layers

Hit delete-selections-select none

Select the pink centre rectangle shape layer-selections-select all-float-defloat

Copy and paste your close up of choice-arrange over the selected shape

Now repeat the above

Select the oval shape layer-selections-select all-float-defloat

Selections-modify-expand by 2.00-new raster layer

flood fill with #000000-move this layer below the original oval layer

Selections-modify-expand by 5.00-new raster layer-flood fill with #f23092

Move this layer below the black oval layer we just did

Adjust-add/remove noise-add noise-use following settings

Drop shadow 0, 0, 4.00, 10.26-black

Select the original oval shape layer-selection tool-rectangle

Draw around the left half of the oval shape

Repeat above noise settings-selections-select none

Using the selection tool again-rectangle-draw around the right half of the oval shape

Effects-plugins-penta.com-color dot

Copy and paste your tube of choice-arrange to the right of your tag

Erase any excess-duplicate-adjust-blur-gaussian blur-change the blend mode to soft light

On the original tube layer-add drop shadow of 1, 1, 40, 4.00 black

Using a font of choice-I am using Radius-add the words 'Its Better To Be A Misfit'

Arrange as above-add following gradient glow settings

Add drop shadow 0, 0, 40, 10.26 black

Add your name to your tag-arrange as desired

Add above gradient glow settings and drop shadow

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 2nd August 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Insania Misfit

2011-02-23T13:28:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

This was a commission that Rachey and myself got

Tag template #271 by me you can get this from my blog here

Spike element and wordart of choice - the spikes I used are by Tyleress and not sure if I can supply them

The Naughty wordart I used is by Schweetieangel again not sure if I can supply

Fonts of choice - I am using Radius, Century gothic and FFF Urban

Filters used

Eye candy 4000 - Gradient Glow

VanDerLee - Unplugged X - Interlace

Lets get started - this is a real quick tutorial

Open up my tag template-image-canvas size-change the width and height to 700 x 700-click ok

Close off the copyright layer

Select the circle layer-selections-select all-float-defloat

Open up your close up of choice-copy and paste over to your canvas

Arrange to the right of the circle-once happy-selections-invert-hit delete-selections-select none

Change the blend mode to luminance (L)-lower the opacity to around 40

Select the small circle layer-selections-select all-float-defloat

Open your tube of choice-copy and paste to your canvas

Arrange over the selected circle-selections-invert-hit delete

Duplicate the tube part-on the duplicated layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

On the original tube part layer-change the blend mode to luminance (L)

Repeat the above for the small circle 2 layer

Copy and paste your main tube of choice-arrange in the centre of your tag

Erasing any excess-duplicate it-on the duplicated layer

Adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

On the original tube layer-add drop shadow of 0, 0, 40, 10.26 black

Add your elements, wordart of choice-arrange as above

Using a font of choice-I am using Century Gothic-add the words 'Insania Misfit'

Arrange as above

Now using a pixel font of choice-I am using FFF urban again add the words 'Insania Misfit'

See tag above

Add your name using a font of choice-I am using Radius

Repeat above gradient glow settings and drop shadow

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 7th October 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Hot Stuff Baby

2011-02-23T13:21:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

Tag template #260 by me you can get this from my blog here

Font of choice - I am using Fabulous 50s

Filters used

VanDerLee - Interlace

Penta.com - color dot

Eye Candy 4000 - Gradient glow

Xero - Fritillary

Lets get started

Open up my tag template-close off the watermark layer

Image-canvas size-change the width and height to 700 x 700

Select the thin rectangle4 layer-selections-select all-float-defloat

Open up your close up of choice-copy and paste on to the canvas

Arrange over the selected rectangle-selections-invert-hit delete

Selections-select none-duplicate the close up layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-select the original close up layer

Change the blend mode on that to luminance (L)

Back on the duplicated close up layer-effects-plugins-VanDerLee-Interlace

Default settings

Add drop shadow to these layers-thin rectangle, thin rectangles 3, 4, 5 and 6 also the thin glittered rectangle layer

0, 0, 40, 10.26 black

Select the rectangle layer-effects-plugins-penta.com-color dot

Use these settings

Select the oval shape layer

Selection tool-rectangle-draw a selected rectangle around the top part of the oval shape

Repeat for the bottom part of the oval shape

Repeat above color dot settings

Selections-select none

Using the selection tool again-rectangle

Draw out another selected rectangle in the centre of the oval shape

Then draw out 2 more thin rectangles above the centre one

Effects-plugins-xero-fritillary-settings of choice

As I made this tag a few weeks ago I cannot remember my settings for this

Once happy making sure you are on the oval shape layer

Selections-select all-float-defloat-selections-modify-expand by 5.00

New raster layer-flood fill with #ffffff-Add above noise settings to this layer

Move this layer below the oval layer

Drop shadow 0, 0, 30, 3.00 black

Select Hot Stuff layer-add drop shadow 0, 0, 40, 10.26 black

Repeat for the Baby layer

Copy and paste your tube of choice onto your canvas

Arrange as above-selections-select all-float-defloat

New raster layer-flood fill with #000000-selections-select none

Move this layer below your tube layer-arrange as above

Add above color dot settings-drop shadow 0, 0, 40, 10.26 black

Select your tube layer-effects-plugins-eye candy 4000-gradient glow

Use the following settings

bR>

Add drop shadow 1, 1, 20, 2.00 black

Using a font of choice-I am using Fabulous 50s

Add your name to your tag-arrange as above

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 24th August 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Hot

2011-02-23T13:14:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Keith Garvey you will need to use about 5 tubes of the same artist

If you would like to use his artwork please visit PSP Tubes Emporium

#I bought this when Garv was still at MPT

Tag template #106 by me which you can download from my blog here

Mask by Vix thanks hun!!

Font of choice - I am using 'Waterbrush Rob'

Pattern fills

Supplies here

Let's get started

Open up my tag template CTRL & D to duplicate it

Close off the original

Image canvas size-change the width and height to 700 x 700

Select the wordart template layer-now using the magic wand-click inside the letter H to select it

Choose a tube for the H-copy and paste this onto your canvas-arrange over the letter H

Selections-invert-hit delete-selections-select none to deselect

Repeat the above for the remaining letters-using different tubes

Select the wordart template layer again-selections-select all-float-defloat

Selections-modify-expand by 2. 00-new raster layer-flood fill the letters with #f57ca7 and #000000

See tag above-select none-now move the flood filled layer below the tube layers

Add drop shadow to this layer 5, 5, 60, 12.83, black

Select the rectangle 3 layer-selections-select all-float-defloat-new raster layer

Flood fill this layer with white-do not deselect yet-new raster layer-open up the pattern fill 3 supplied-on your pallette select pattern

Then look for the pattern fill 3

Click ok-then flood fill the selected area with this pattern-selections-select none

Lower the opacity of the pattern to around 38

Add drop shadow to the white rectangle layer 0, 0, 60, 12.83, black

Select the rectangle 2 layer-selections-select all-float-defloat-new raster layer

Flood fill this with pattern fill1-selections-select none-drop shadow as above

Repeat the above for the rectangle 1 layer but flood fill with the pattern fill 2

Drop shadow as above

Copy and paste your main tube-arrange to the left of your tag

Drop shadow 5, 5,, 60, 12.83, black

Open up Vix's mask-new canvas 550 x 550

Flood fill with #f57ca7-layers-new mask layer-from image

Look for Vix_Mask147-make sure invert mask data is unticked-click ok

Merge group-copy and paste this onto your tag

Move this layer above the white background-arrange more the the right of your tag

Using a font of choice-I am using 'Waterbrush Rob'- add your name to your tag

I placed the name in the center of the tag but this is upto you

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 4th January 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Here Come The Girls

2011-02-23T13:05:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up tube will work best

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I bought this tube when Ismael was at MPT

Tag template #69 by Rachel you can get this from her blog here

Mask 220 by Weescotslass Thanks hun!

Font of choice - I am using 'Grado Gradoo NF'

Texture of choice

Filters used - Penta.com - color dot, Eye Candy 4000 - Gradient Glow and VanDerLee Unplugged x - Interlace here

Supplies here

Lets get started

Open up your supplies and minimize for now all except Rachel's tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Close off the watermark layer-new raster layer-flood fill white

Move this layer to the very bottom this is your background

Select the layer named black shape left-select all-float-defloat

Open up the texture supplied-resize-copy and paste-arrange over the selected shape

Selections-invert-hit delete-do not deselect just yet

Open up your close up tube of choice-resize if needed

Copy and paste over the selected shape-hit delete-selections-select none

Duplicate the tube layer-on the duplicated layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to overlay-select the original tube layer-change the blend mode to Luminance (L)

Back on the duplicated tube layer-effects-plugins-VanDerLee-Unplugged X-Interlace

Use the following settings

Repeat the above for the right shape

Select the pink shape layer-selections-select all-float-defloat

Copy and paste the texture again-selections-invert-hit-delete

Select the frame left layer-selections-select all-float-defloat-new raster layer

Change your foreground colour to #f66c9c and the background colour to #ffffff

Click on the foreground colour then choose the gradient tab

Using the following settings

Flood fill the frame with the gradient-do not deselect yet

Effects-plugins-penta.com-color dot-using the following settings

Selections-select none

Effects-plugins-eye candy 4000-gradient glow-using the following settings

Drop shadow 0, 0, 30, 3.00 black

Repeat for the frame right layer also repeat for the frame1 layer

But before you flood fill this layer with the gradient-change the foreground colour to #885694

Select the pink stars layer-select all-float-defloat-new raster layer

Flood fill alternate ones with #f66e9d and #000000-selections-select none

Adjust-add/remove noise-add noise-using the following settings

Drop shadow 1, 1, 30, 3.00 black

Select the grey strip layer-selections-select all-float-defloat

New raster layer-flood with fill the same gradient used for frame1 layer

Selections-select none-repeat above gradient glow settings

Drop shadow 0, 0, 30, 3.00 black

Now on the black and white stars layer-selections-select all-float-defloat

New raster layer-flood fill the left star with #f66e9d and flood fill the right star with #875493

Repeat the above noise settings-drop shadow 1, 1, 30, 3.00 black

Select the HCTG layer-selections-select all-float-defloat

New raster layer-flood fill the word 'Come' with #875493

Flood fill the word 'Girls' with #f66d9c-selections-select none

Add the above noise setting to this layer

Add drop shadow to the words 1, 1, 30, 3.00 black

Open up the mask supplied

New blank canvas 600 x 600-change your foreground to #875493-background to #f66d9c

Click on the foreground colour then choose the gradient tab

Using the following settings

Flood fill the canvas with the gradient

Layers-new mask layer-from image-look for the mask WSL_Mask220-click ok

Merge group then copy and paste over to your tag-arrange this layer above the white background layer

Copy and paste your tube of choice-arrange this in the center of your tag

Drop shadow 0, 0, 30, 3.00 black

Using a font of choice-I am using 'Grado Gradoo NF'

Add your name to your tag-arrange as above-convert to raster-change the blend mode to Overlay

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 10th April 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

©Just T!ckled P!nk 2007-2011. Any resemblance to another tutorial is purely coincidental.

Proud member of TWI

Good V's Bad

2011-02-23T12:48:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tubes of choice pref a good and bad one

I used artwork by Armando Huerta

If you would like to use his artwork please visit My PSP Tubes

Exclusive tag template #5 by Yvette you can get this from our forum blog here

Devil tails, halos and horns - if these are yours please email me so I can credit or remove thanks!

Clouds by Rainbow Coffi - you can get them here

Font of choice - I am using Century Gothic and FFF Urban

Bow of choice

Mask by Becky

Filters used - Eye Candy 4000 - Gradient Glow and Fire, Penta.com - color dot and MuRa's Meister - copies

Supplies here

Lets get started

Open up your supplies and minimize for now all except the tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Close off the watermark layer

Select the font tool-FFf Urban-size 6-foreground null-background #000000

Type out the words 'What Side Are You On??'

Objects-align-center in canvas-convert to raster

Effects-plugins-MuRas Meister - Copies-using the following settings

Select the circle layer-selections-select all-float-defloat

Back on the text layer-selections-invert-hit delete-keep selected for now

Change foreground colour to #b7ddf3 and background to #ffffff

Click the foreground colour choose the gradient tab-following settings

New raster layer-selections-invert-flood fill the selected circle with the gradient

Move this layer below your text layer-copy and paste your 'Good' tube of choice

Arrange this over the selected circle-selections-invert-hit delete

Lower the opacity to around 26-making sure this layer is above your text

On the text layer-change the blend mode to overlay

On the gradient layer-effects-plugins-eye candy 4000-gradient glow-use the following settings

Drop shadow 1, 1, 30, 3.00 black

Repeat the above for the arrow layer-but change the foreground color to #b42321

Also change the text to 'Good Vs Bad'-see tag above

Also add the filter-penta.com-color dot-use these settings

Select the backgrounds layer-selections-float-defloat

Change foreground colour to #b42321 and background to #ffffff

Click the foreground colour choose the gradient tab-following settings

Flood fill the right background with the gradient

Change the foreground to #b7ddf3

Click the foreground colour choose the gradient tab-following settings

Flood fill the left background with that gradient

Effects-plugins-penta.com-color dot-use the above settings

Copy and paste your 'Good' tube onto your canvas-arrange over the left selected area

Selections-invert-hit delete-repeat for your 'Bad' tube-arranging over to the right

Duplicate your 'Bad' tube-adjust-blur-gaussian blur-change the radius to 3.00

Change the blend mode to soft light-on the original tube layer-change the blend mode to luminance (L)

Repeat this for your 'Good' tube

Select the frames layer-selections-select all-float-defloat

New raster layer-flood fill the left frame with #b7ddf3 and the right frame with #b42321

Selections-select none-adjust-add/remove noise-noise-use following settings

Add the above gradient glow settings-drop shadow 1, 1, 30, 3.00 black

Open up Rainbow Coffi's cloud-choose which you want to use

Copy and paste onto your tag-resize if needed-arrange as above on your good side

Preset shape-rectangle-foreground null-background colour of choice as this will be hidden

Draw out a rectangle about the size as below

Convert to raster-effects-plugins-eye candy 4000-fire-use the following settings

Arrange this on your bad side-below the arrow layer so none of the rectangle is showing

See tag above-duplicate this fire layer you will need this in a sec

Select the VS layer-selections-select all-float-defloat

New raster layer-flood fill the V with #b7ddf3-flood fill the S with #b42321

Copy and paste a cloud-arrange just over the letter V-selections-invert-hit delete

Grab the duplicated fire layer-arrange this over the S-hit delete

Selections-select none-add above gradient glow settings-drop shadow 1, 1, 30, 3.00 black

Add any elements to the VS-I added a halo and a bow on the good side

And a devil tail and horns to the bad side-see tag above

Add drop shadow to any elements you add

Select the word good layer-selections-select all-float-defloat

New raster layer-flood fill with #b7ddf3-selections-select none-repeat gradient glow settings

Drop shadow 1, 1, 30, 3.00 black-arrange as above

Repeat for the word bad but flood fill with #b42321

New raster layer 500 x 500-flood fill with #b7ddf3

Layers-new mask layer-from image-look for Becky_Mask038-click ok

Merge group-copy and paste this onto your tag-arrange this on your good side

Make sure this layer is just above your white background

Repeat the above but flood fill with #b42321-arrange this on your bad side

Using a font of choice- I am using Century Gothic-add your name

Place where desired-repeat above gradient glow settings-drop shadow 1, 1, 40, 4.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 24th May 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Girls Best Friends

2011-02-23T12:19:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Keith Garvey

If you would like to use his artwork please visit PSP Tubes Emporium

Template by me

Mask by Vix Thanks hun!

Font of choice - I am using 'Impact' 'Elisia' and 'Roelandt Rob'

Diamond

Filter used - 'Eye Candy 4000 - Gradient Glow'

Supplies here

Lets get started

Open up your supplies and minimize for now all except the template

Image-canvas size-change the width and height to 700 x 700-click ok

Select the center rectangle-selections-select all-float-defloat

Copy and paste your tube of choice-arrange to the left of the rectangle

Selections-invert-hit delete-selections-select none

Duplicate this layer-image-mirror-arrange to the right of the rectangle

Select the left tube part layer-duplicate-select the original tube layer we just duplicated

Change the blend mode to Luminance (L)-select the duplicated layer

Adjust-blur-gaussian blur 3.00-click ok

Change the blend mode to soft light

Repeat for the right tube part layer

Choose a nice fat font or the one I am using 'Impact' colour of choice

Add the words 'Diamond' arrange this in the center of the middle rectangleConvert to raster-adjust-add/remove noise-add noise using the following settings

Drop shadow 0, 0, 60, 12.83 black

Select the font tool-font of choice I am using 'Elisia'
Using a colour of choice-type out the words 'Girls Best Friend' arrange above your diamond word
Convert to raster-duplicate-arrange the duplicated layer at the bottom of the diamond word
Add noise to both these layers using the same settings as above
Repeat drop shadow

Select the stars layers-add noise to these also-same settings as above

Add drop shadow 0, 0, 60, 12.83 black to the all the rectangle layers

Copy and paste the supplied diamond-arrange as above

New blank canvas 550 x 550-flood fill black
Open up Vix's mask-new canvas 550 x 550
Layers-new mask layer-from image
Look for Vix_Mask318-make sure invert mask data is unticked-click ok
Merge group-copy and paste this onto your tag
Move this layer above the white background

Copy and paste your tube-arrange in the center of your tag
Drop shadow 0, 0, 60, 12.83 black
Duplicate-on the original tube layer-change the blend mode to Luminance (L)
Select the duplicated layer-Adjust-blur-gaussian blur 3.00-click ok
Change the blend mode to overlay

Add your name-arrange bottom right of your tag
Effects-plugins-eye candy 4000-gradient glow-use following settings

Drop shadow as above

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 15th March 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

For You I'm Trouble

2011-02-23T12:06:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

2 Tubes of choice

I used artwork by Keith Garvey

If you would like to use his artwork please visit PSP Tubes Emporium

I bought this tube when Garv was at MPT

Tag template #193 by me you can get this from my blog here

Font of choice - I am using Century Gothic, Pixelette and Franklin Gothic Heavy

Skull and wordart made by me

Filters used - Eye Candy 4000 - Gradient Glow, MuRa's Meister - Copies and VanDerLee Unplugged x - TV Inline here

Penta.com - color dot

Supplies here

Lets get started

Open up your supplies and minimize for now all except my tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Close of my watermark layer

Select the wordart layer-selections-select all-float-defloat

New raster layer-flood fill with black-close off my original wordart layer-do not deselect yet

Create a new blank canvas 500 x 500-using a pixel font-I am using Pixelette

Type out the word 'Trouble'-objects-align-center in canvas-convert to raster

Effects-plugins-MuRa's Meister - Copies-using the following settings

Copy and paste the words onto your tag-arrange over the selected area

Selections-invert-hit delete-do not deselect

Open up your tube of choice-copy and paste onto your tag

Arrange over the letter T-selections-invert-hit delete

Paste the tube again-place over the letter R-hit delete

Repeat this for the remaining letters-close off all the layers all except the tube parts you just added

Merge visible the tube parts-reopen all the layers-making sure the trouble words are above the tube part layer

Select the merged tube layer-duplicate this layer-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to soft light-lower the opacity to around 40 also the original tube part layer

Select the Trouble wordart we flood filled black earlier

Effects-plugins-eye candy 4000-gradient glow-using the following settings

Drop shadow 0, 0, 40, 10.26 black

Change your foreground colour to black and the background colour to #a91313

Click on the foreground colour then choose the gradient tab

Using the following settings

On the template select the circle2 layer-selections-select all-float-defloat

New raster layer-flood fill this with the gradient-selections-select none

Close off my original circle layer

Select the dotted circle layer-selections-select all-float-defloat

New raster layer-flood fill this white-selections-select none-close off my original layer

Select the frame1 layer-selections-select all-float-defloat

New raster layer-flood fill with #a91313-selections-select none

Close off my original frame1 layer

Adjust-add/remove noise-add noise-using the following settings

Now on the frame background1 layer-flood fill this with the following gradient settings

Effects-plugins-penta.com-color dot-using the following settings

Still on the frame1 background layer-selections-select all-float-defloat

Copy and paste your tube of choice onto your tag-arrange over the selected background

Selections-invert-hit delete-paste another tube of choice-arrange next to the previous tube part

Hit delete-selections-select none-duplicate one of the tube parts-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to soft light-back on the original tube layer-change the blend mode to Luminance (L)

Repeat for the other tube part layer

Repeat the above for the frame2 and frame2 background layers

Copy and paste the word art supplied-arrange as above

Copy and paste your main tube of choice-arrange this in the center of your tag

Add drop shadow of choice

Open up the skull supplied-resize-rotate left by 20.00

Copy and paste onto your tag-see tag above

Using a font of choice-I am using Century Gothic-add your name and arrange this on your tag

Effects-plugins-eye candy 4000-gradient glow-using the following settings

Add proper copyright info

Now lets animate your tag

Select the circle layer we flood filled earlier with a gradient

Effects-plugins-VanDerLee-Unplugged X-TV Inline

Click ok-edit-copy merged-open up Animation Shop

Paste as new animation-back to PSP

Effects-plugins-VanDerLee-Unplugged X-TV Inline

Same settings as above so just click ok

Edit-copy merged-back to AS-paste after current frame

Back in PSP once more-effects-plugins-VanDerLee-Unplugged X-TV Inline

Same settings as above so just click ok

Edit-copy merged-back to AS-paste after current frame

Still in AS-edit-select all-animation-frame properties-change the display time to 40-click ok

Now test your animation-once happy-save your tag as .gif

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 4th April 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Cute But Bad

2011-02-23T11:50:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice

I used artwork by Ted Hammond

If you would like to use her artwork please visit CDO

I bought this tube when Ted was at CILM

Scrap kit by Kristin here

It is a PTU one - Cute But Bad

Tag template #334 by me you can get this from my blog here

Film strip of choice I cannot supply the one I am using

Fonts of choice - I am using Bank Gothic and Feuerfeste Normal

Filters used

VanDerLee - Unplugged X - Interlace

Eye Candy 4000 - gradient glow

Penta.com - color dot

Lets get started

Open up my tag template-image-canvas size-change the width and height to 750x 700-click ok

Close off the copyright layer

Select the circle one layer-selections-select all-float-defloat

Open up paper 4 from Kristin's kit

Copy and paste onto your canvas-selections-invert-hit delete

Selections-select none

Repeat the above for the circle left layer

Select circle 2 layer-repeat the above but using paper 2 from the kit

Repeat for the circle right layer

Select the med circle layer-selections-select all-float-defloat

Open up paper 26-copy and paste onto the selected area

Selections-invert-hit delete-selections-select none

Select the frame 1 background layer-using the magic wand select this

Open up your tube of choice-copy and paste over to your canvas

Selections-invert-hit delete-duplicate this layer

Adjust-blur-gaussian blur-radius 3.00-blend mode soft light

Select the original tube layer-blend mode Luminance (L)

Back onto the duplicated tube layer

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Lower the opacity on both the tube layers to around 50

Repeat the above for the frame 2 background layer

Select the circle left 2 layer

Selections-select all-float-defloat

Copy and paste your tube over the selected circle

Selections-invert-hit delete-duplicate this layer

Adjust-blur-gaussian blur-radius 3.00-blend mode soft light

Select the original tube layer-blend mode Luminance (L)

Back onto the duplicated tube layer

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Repeat the above for the circle right 2 layer

Open up your film strip frame of choice

Copy and paste this onto your tag then arrange as above

Using the magic wand-select the second square-selections-modify-expand by 2.00

New raster layer-flood fill with #71448f-selections-select none

Move this layer below the film strip-repeat for the third square but flood fill with #fe41c2

Now select the first square-selections-modify-expand by 2.00

Copy and paste your tube of choice over the selected area

Once happy with what part of the tube you want showing

Selections-invert-hit delete-selections-select none

Duplicate the tube part layer-adjust-blur-gaussian blur-radius 3.00-blend mode soft light

Back onto the duplicated tube layer

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Back onto the duplicated tube layer

Effects-plugins-penta.com-color dot-use the following settings

Repeat the above for the fourth and final square

Select the film strip layer-add the above color dot settings

Selections-select all-float-defloat-selections-modify-expand by 4.00

New raster layer-foreground #71448f-background #fe41c2

Click on the background colour to bring up the materials properties

Gradient tab-use the following settings

Flood fill the selected area with this gradient

Selections-select none-drop shadow 1, 1, 30, 3.00 black

Now you can add any elements from the kit-see tag above

Using a font of choice-I am using Bank Gothic

Add the words 'Cute' and 'Bad' to your tag-see my tag above

Also you can add some stars if you wish

Copy and paste your tube of choice-arrange this in the center of your tag

Duplicate-adjust-gaussian blur-radius 3.00

Change the blend mode to overlay

On the original tube layer add drop shadow of 1, 1, 30, 3.00 black

Using a font of choice-I am using Feuerfeste Normal

I also added gradient glow to the name

Drop shadow 1, 1, 30, 3.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 25th February 2010.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Creative Misfits

2011-02-23T11:37:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube and close up of choice

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I bought this tube when Ismael was at AMI

Template by me please do not use in any other tutorials unless I decide to put this on my blog

Font of choice - I am using Radius & Water Brush Rob

Filters used

Eye Candy 4000 - Gradient glow

Supplies here

This is a real quick tutorial

Lets get started

Open up my template supplied

Image-canvas size-change the width and height to 700 x 700

Select the Misfits layer-selections-select all-float-defloat

Open up your close up layer of choice

Copy and paste onto your canvas-arrange over the letter M

Selections-invert-hit delete

Paste the close up again-arrange over the rest of the letters

Hit delete-repeat again if anymore of the letter needs covering with the close up

Selections-select none

Close off all the layers all except the close ups we just added

Merge visible-reopen the layers

Duplicate the close up parts-adjust-blur-gaussian blur-radius 3.00

As always change the blend mode to soft light-lower the opacity to around 36

Select the original close up part layer-change the blend mode to luminance (L)

Lower the opaciy to around 36 again

Select the duplicated close up layer-effects-plugins-penta.com-color dot

Use the following settings

Copy and paste your tube of choice-arrange this as above so it is like the I in Misfits

Duplicate-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light

On the original layer-add drop shadow off 0, 0, 40, 10.26 black

Using a font of choice-I am using Radius-add the word Creative or what ever you like

Rotate left by 90-arrange this to the left of your tag-convert to raster

Adjust-add/remove noise-add noise-use these settings

Effects-plugins-eye candy 4000-gradient glow-use following settings

Add a star next to the word Creative if you wish

Using a pixel font of choice-I am using FFF Urban-size 6

Add the words Where Creativity Rocks or anything else of choice

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 24th August 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Crazy Sexy Cool

2011-02-23T11:25:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tubes of choice

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I bought this tube when Ismael was at MPT

Tag template #37 by Melissa you can get this from her blog here

Font of choice - I am using Dreamscar

Filters used - Penta.com - Jeans and VM Extravaganza - transmission

Eye Candy 4000-gradient glow

Lets get started

Open up the template-close off the watermark layer

Image-canvas size-change the width and height to 700 x 700

New raster layer-flood fill this with white-move this layer to the very bottom

Change your foreground colour to #5c4977 and the background colour to #ee2b8f

Click on the foreground to bring up materials properties-select the gradient tab-use the following settings

Click ok

Select the lt square layer-selections-select all-float-defloat

Flood fill this with the gradient-effects-plugins-penta.com-jeans-use following settings

Open up a tube of choice-copy and paste-arrange over the selected square

Selections-invert-hit delete-duplicate this layer-on the duplicated layer

Adjust-blur-gaussian blur-radius 3.00-change the blend mode to soft light

Selections-select none

Click on the foreground colour again-gradient tab-tick the invert box

Click ok-select the rt square layer-selections-select all-float-defloat

Flood fill this with the gradient-add above penta.com-jeans settings

Open up another tube of choice-repeat the above

Selections-select none

Now select the lt frame layer-selections-select all-float-defloat

New raster layer-flood fill this with #ee2b8f-close off the original frame layer

Selections-select none-adjust-add/remove noise-add noise-use following settings

Drop shadow 0, 0, 40, 10.26 black

Repeat the above for the rt frame layer-but flood fill with #5c4977

Select the middle square layer-selections-select all-float-defloat

Flood fill with #000000-repeat above penta.com-jeans setting

Selections-select none-select the middle frame layer

Selections-select all-float-defloat-new raster layer-flood fill with #5c4977

Close off the original frame layer-selections-select none

Repeat above drop shadow

Select the rectangles layer-selections-select all-float-defloat

Flood fill the first and the last rectangle with #000000

Flood fill the second and 4th rectangle with #ee2b8f

Now flood fill the middle rectangle with #5c4977

Selections-select none

Now select the rectangle frames layer

Selections-select all-float-defloat

New raster layer-flood fill the first and last frame with #ffffff

Flood fill the second and the 4th frame with #5c4977

Flood fill the middle frame layer with #ee2b8f

Selections-select none

Add drop shadow 0, 0, 40, 10.26 black

Close off the original frame layer

Select the wordart layer-selections-select all-float-defloat

Working on the top words first-flood fill the word Crazy with #027589

Flood fill Sexy with #000000 and flood fill Cool with #ee2b8f

Now on the bottom words-flood fill Crazy with #ee2b8f

Flood fill Sexy as above-finally flood fill Cool with #027589

Effects-plugins-eye candy 4000-gradient glow-using the following settings

Drop shadow 0, 0, 40, 10.26 black

Select the circle layer-selections-select all-float-defloat-new raster layer

Close off the original circle layer

Change your foreground to #ee2b8f and background to #027589

Click on the foreground colour to bring up the materials properties

Select the gradient tab-use following settings

Flood fill the circle with the gradient-selections-select none

Adjust-blur-gaussian blur-change the radius to 20.00

Effects-plugins-VM Extravaganza - Tranmission-use following settings

Open your main tube of choice-copy and paste this onto your tag

Arrange in the center-repeat above drop shadow

Using a font of choice-I am using dreamscar

Add your name to your tag-convert to raster layer

Adjust-add/remove noise-add noise-use following settings

Repeat above gradient glow settings-add drop shadow 0, 0, 40, 10.26 black

Crop and resize if needed

Add proper copyright info then save as .png

Thanks for trying my tutorial. I hope you have enjoyed it

This tutorial was written on 24th April 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Biatchitude

2011-02-23T11:09:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Ismael Rac

If you would like to use his artwork please visit his store here

I bought this tube when Ismael was at AMI

Photo frame #9 by Dozi Baer which you can get from here

Tag template #269 by me you can get this from my blog here

Splat brushes of choice

Fonts of choice - I am using Will & Grace and FFF Urban

Filters used

Eye candy 4000 - Gradient Glow

VanDerLee - Unplugged X - Interlace

Richard Rosenman - Grid Generator

MuRas Meister - Copies

Lets get started

Open up my tag template-image-canvas size-change the width and height to 700 x 700-click ok

Close off the copyright layer

Select the oval shape layer-selections-select all-float-defloat

New raster layer-flood fill with #ff48a7-selections-select none

Adjust-blur-gaussian blur-change the radius to 20.00

Rotate left by 15.00-effects-plugins-Richard Rosenman - Grid Generator

Use the following settings

Move this layer below the glitter oval layer

Select the circle layer-selections-select all-float-defloat

Open up your close up of choice-copy and paste this onto the selected area

Arrange to the right of the circle-selections-invert-hit delete

Change the blend mode to luminance (L)-lower the opacity to around 22

Open up Dozi Baer's photo frame-resize by 80%

Copy and paste this over to your canvas

Using the freehand selection tool-make a selection around 2 of the frames

See below

New raster layer-change your foreground to #ff48a7 and background to #ffffff

Click the foreground colour to bring up the material properties

Select the gradient tab-use the following settings

Flood fill the selected area with the gradient

Move this layer below the frame-keep selected

Copy and paste your close up again-arrange over the selected area

Selections-invert-hit delete-selections-select none

Duplicate the close up layer-on the duplicated layer

Adjust-blur-gaussian blur-radius 3.00-change the blend mode to soft light

Effects-plugins-VanDerLee - Unplugged X - Interlace-default settings

Using a pixel font of choice-add the words 'I Got The Biatchitude'

Objects-align-center in canvas-convert to raster

Effects-plugins-MuRas Meister - Copies-using the following settings

Close this layer for now

Using the freehand selection tool again-make a selection around the first frame

New raster layer-flood fill with the gradient using the following settings

Open up your tube of choice-image-mirror

Copy and paste this onto your canvas-arrange over the selected frame

Selections-invert-hit delete-change the blend mode to luminance (L)

Open up the words we did earlier-hit delete-change the blend mode to color (L)

Make sure this layer is above your tube layer

Copy and paste your main tube of choice-arrange in the centre of your tag

Erasing any excess-add drop shadow of 0, 0, 40, 10.26 black

Add any splat brushes of choice if desired

Select the circle layer-effects-plugins-eye candy 4000 - Gradient Glow

Use the following settings

Using a font of choice-I am using Will & Grace-add your name to your tag

Arrange at the bottom-add drop shadow 0, 0, 40, 10.26 black

Also using a pixel font of choice-I am using FFF Urban-add any other words-see tag above

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 7th October 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Bad Attitude

2011-02-23T10:47:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Keith Garvey

If you would like to use his artwork please visit PSP Tubes Emporium

I bought this tube from MPT

Tag template #335 by me you can get this from my blog here

Scrap kit by Kristin here

It is a PTU one

Font of choice - I am using SF Iron Gothic

Filters used

Eye candy 4000 - Gradient Glow

Penta.com - color dot

VanDerLee - Unplugged X - Interlace

Lets get started

Open up my tag template-image-canvas size-change the width and height to 750x 700-click ok

Close off the copyright layer

Select the rectangle shape left layer-selections-select all-float-defloat

Open up your close up of choice-copy and paste this onto your canvas

Arrange over the selected area-selections-invert-hit delete

Selections-select none-duplicate the close up layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original close up layer

Change the blend mode to Luminance (L)

Back on the duplicated close up layer

Effects-plugins-penta.com-color dot-use the following settings

Repeat the above for the rectangle shape right layer

Except do not add the filter penta.com-color dot

You want to add VanDerLee - Unplugged X - Interlace-default settings

Select circle 1 layer-selections-select all-float-defloat

Open up paper 1 from the kit-copy and paste this onto your canvas

Arrange over the selected area-selections-invert-hit delete

Selections-none-delete the original circle layer

Repeat the above for circle 2 layer but use paper 4 from the kit

Repeat the above again for circle 3 layer but using paper 6 from the kit

I actually used a different paper from her Riot kit but paper 6 will work for this

Open up the filmstrip from the kit-copy and paste this onto your tag

It should sit nicely in the center of my template

Using the magic wand-select the center of each of the square shapes on the frame

Selections-modify expand by 2.00-new raster layer-flood fill with black

Move this layer below the frame layer

Back on the frame layer-selections-select all-float-defloat-selections-expand by 4.00

New raster layer-flood fill with #ca288e-selections-select none

Move this layer below the film strip layer

Adjust-add/remove noise-add noise-use following settings

Select the film strip layer again

Using your magic wand select the first square on the frame

Selections-modify expand by 2.00

Copy and paste your close up of choice-arrange over the selected area

Selections-invert hit delete-select none

Duplicate the close up layer-adjust-blur-gaussian blur-radius 3.00

Change the blend mode to soft light-on the original close up layer

Change the blend mode to Luminance (L)

Back on the duplicated close up layer

Add the filter-VanDerLee - Unplugged X - Interlace-default settings

Repeat the above for the remaining squares

But on the center 2 squares I added the color dot filter-same settings as above

Now you can add any elements of choice from the kit

I added candy 2 and the buckles-I recoloured one of the buckles to match my tag

I also added the small scattered stars element from the kit-arrange this at the bottom of your tag if you use

Copy and paste your tube of choice-arrange this in the center of your tag

Duplicate-adjust-gaussian blur-radius 3.00

Change the blend mode to soft light

On the original tube layer add drop shadow of 1, 1, 30, 3.00 black

Using a font of choice-I am using SF Iron Gothic

I added gradient glow to it also

Drop shadow 1, 1, 30, 3.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 5th March 2010.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI

Abit Risky

2011-02-23T10:20:00.000-08:00

This tutorial was written for those

that have a working knowledge of PSP.

Supplies Needed:

PSP 9 (any version will work)

Tube of choice and a close up

I used artwork by Elias Chatzoudis

If you would like to use his artwork please visit PSP Tubes Emporium

Tag template #178 by me you can get this from my blog here

Screws - if these are yours please email me so I can credit or remove - thank you

Mask by Becky

Font of choice - I am using 2 Peas SackOPotatoes and Squire

Filters used - Eye Candy 4000 - Gradient Glow, VM Extravaganza - Transmission and Vanderlee - Unplugged X

Supplies here

Lets get started

Open up your supplies and minimize for now all except the tag template

Image-canvas size-change the width and height to 700 x 700-click ok

Close off the watermark layer

Select the font tool-Squire-size 10-change the fill to #000000-type out the words 'A bit risky'

Objects-align-center in canvas-convert to raster

Effects-plugins-MuRas Meister - Copies-using the following settings

Close this layer for now

Select the film strip background layer-selections-select all-float-defloat

New raster layer-flood fill with #ffffff-keep selected

Effects-plugins-vanderlee - Unplugged X - interlace - default settings

Open up your tube of choice-image-mirror-copy and paste this onto your canvas

Arrange over the first selected area on the film strip-selections-invert-delete

Paste the tube again-arrange over the center selected area-delete

Repeat for the last selected area

Un X the words layer we did at the start-hit delete-selections-select none

Select the tube part layer in the first square on the filmstrip-duplicate this layer

On the duplicated layer-adjust-blur-gaussian blur-radius 3.00-click ok

Change the blend mode to Soft light-back onto the original tube part layer

Change the blend mode to Luminance(L)-drop shadow 1, 1, 40, 4.00 black

Repeat for the remaining 2 tube parts

Move the words layer above the tube layers-change the blend mode to Soft light

Select the film strip layer-drop shadow 0, 0, 40, 10.266 black

Open up the screws supplied-choose one-copy and paste these onto your tag

Resize-arrange on the filmstrip

Change foreground colour to #78195b and background to #000000

Click the foreground colour choose the gradient tab-following settings

Select the circle layer-selections-select all-float-defloat

New raster layer-flood fill this with the gradient

Selections-select none

Effects-plugins-VM Extravaganza - Transmission-use following settings

Effects-eye candy 4000 - gradient glow-use following settings

Drop shadow 1, 1, 40, 4.00 black

Close off the original circle layer

Select the font tool-Squire-size 10-change the fill to #78195b-type out the words 'A bit risky'

Objects-align-center in canvas-convert to raster

Effects-plugins-MuRas Meister - Copies-using the following settings

Select rectangle1 layer-selections-select all-float-defloat

New raster layer-flood fill with #000000-selections-invert

Select the word layer we just did-hit delete-selections-select none

Make sure the word layer is above the black rectangle layer

On the black rectangle layer-adjust-add/remove noise-use following settings

Add above gradient glow settings to the rectangle

Drop shadow 0, 0, 40, 10.26 black

Close off original rectangle 1 layer

Select the rectangle 2 layer-selections-select all-float-defloat

New raster layer-flood fill with #78195b-selections-select none

Add above noise and gradient glow settings-repeat above drop shadow

Selecting the words layer-selections-select all-float-defloat

New raster layer-flood fill with the same gradient we filled the circle with

Selections-select none-repeat above noise and gradient glow settings

Drop shadow 0, 0, 40, 4.00 black

Close off original words layer

Duplicate-see above tag for placement

Copy and paste your tube of choice-arrange this to the left of your tag

Drop shadow as above

Open up the supplied mask

New blank canvas 500 x 500 flood fill this with #000000

Layers-new mask layer-from image-look for Becky_Mask038-click ok

Merge group-copy and paste this onto your tag-arrange to the right of your tag

Make sure this layer is just above your white background

Repeat what we just done but flood fill the blank canvas with #78195b

Arrange this to the left of your tag

Using a font of choice- I am using 2 Peas SackOPotatoes-add your name

Place where desired-repeat above gradient glow settings-drop shadow 1, 1, 40, 4.00 black

Crop and resize your tag if needed-add proper copyright info then save your tag as .png

Thanks for trying my tutorial. I hope you have enjoyed it.

This tutorial was written on 2nd May 2009.

The concept of the tutorial is copyrighted.

Feel free to link to the tutorial and or print out for your personal use.

But please do not copy it in any way to put online, pass out, or rewrite without permission.

The image you create using this tutorial is for you do to as you wish except for monetary gain or for merchandising.

Proud member of TWI